How to Repair Water Damaged Wood Floor

We face some problems in our daily life and repairing a water damaged wooden floor is very important problem which we usually face in daily life. Well you have to perform some actions before repairing. First you have to dry out the floor and subfloor also so that the board does not continue to wrap.

It’s very important to dry the floor then clean it. Mold spores can be left after cleaning the floor but you have to take care of it. Mold spores can cause damage to health and it can cause several health diseases so you have to clean the mold too. Beware of the mold while cleaning the floor as mold is not visible usually so you should not avoid mold while cleaning and washing the clothes.

The best way to dry the floor is to buy special fans to make it dry. Then point these fans to the floor. Do not turn off the AC because it is needed for the drying process. Open windows next to the floor area about 2 inches. The excess moisture has to go somewhere with air conditioning also. More importantly, beneath the floor in the basement (you didn’t say it you have a crawl space or full basement), you should also have big fans pointed up towards the place where humidity exists.. If you happen to have a finished ceiling below the ground, you should also think about cutting a precise (and repairable) square in the drywall. This is how the fans can better dry out the base of the subfloor. You should also do something to clean up the basement too if the climate is humid much. You should also freshen the basement a bit, unless the climate is really humid, and then use spray which decreases the humidity in the basement on those soggy days.

You can imagine the wood to continue to swell. You should then relieve the stress by removing about 2 boards all the way across the middle of the kitchen. It’s a good idea to do this anyway because this will allow more ventilation of the subfloor. I assume you will call your insurance agent, but you will also call a floor contractor or los angeles water damage restoration. He will have an electronic moisture meter. He will fix every problem you are facing about the wooden floor. You can fix the problems of water damage to the wood in these ways.

 

 

Mold and use of bleach: killing the mold

Mold and use of bleach: killing the mold

Mold growth after the water damage is the serious problem for the health of human beings and life if the household items. As soon as mold growth is detected in your home, you must try to remove it immediately. If the mold is allowed to grow then it forms colonies and the situation is worsened. You can remove mold through household products and by calling an expert of los angeles water damage restoration.

Mold Removal and Bleach

If you want to remove it on your own then the best chemical for killing the mold is chlorine bleach or oxygen bleach. Bleach is the most popular type of mold killer and mold killing products available in the markets also contain bleach. Sodium hypochlorite is the active ingredient of the chlorine bleach and other major component is water. Bleach is not expensive and is easily available in the markets. Bleach is a good sanitizer and helps in killing the bacteria and viruses. So it can also be helpful in killing the mold and neutralizing the mold spores as well. Bleach successfully kills the mold grown on the non-porous surfaces (tiles, glass and bathtubs) but it fails to remove the mold from porous surfaces (drywall and wood). This is because bleach cannot penetrate into the porous surfaces and thus only surface mold is killed.

  • When using bleach for removal of mold, you should ventilate the area. The circulation of air must be enough so open the doors and windows of the mold affected areas.
  • Bleach is damaging for the human skin so you should use the proper personal care equipments like goggles, gloves and face mask.
  • Now make a solution of chlorine bleach and water. The ratio should be one cup of chlorine for one gallon of water (1:10).
  • Spray this solution to the moldy areas with the help of a spray bottle. If spray bottle is not available then any piece of cloth or sponge can also be used. These sponges and clothes can be used single time because bleach will destroy them.

Is bleach suitable for the mold removal?

Experts suggest that use of bleach for mold removal is not a better option. There are several disadvantages linked with the bleach usage.

  • Bleach loses its effectiveness and power after 90 days
  • Bleach is corrosive in nature and damages the fibers of the porous materials
  • Gases produced by the bleach can be damaging for the lungs
  • It is a chemical that can burn your skin
  • Bleach cannot kill mold grown on the porous surfaces

That is why experts suggest using natural products for mold removal. These products include vinegar and tea tree oil.

 

 

Types of damages

 

los angeles Smoke Damage- The warmth pushes the filth, the by-product of unfinished burning, and can cover up the whole thing in its path.  Smoke seeks a type of symmetry; it travels until its vigor has been used up and travels to cooler temperatures. Filth, when tested, is always found to be on the acidic side of the pH scale.  Acidic materials are disparaging to most rudiments in nature. Acidity over time continues to ignominy most metals by engraving and oxidizing leading to discoloration, pitting or corrosion of the substrate. Finish coverings over metals are often yellowed and lessened and will not pass over time because they cannot stand the insensate acidic environment.  These acid stain dregs have continuing reactions until detached.

Structural Damage- Deflection, more generally referred to as deformation or warping from heat, can create metal stresses that may have compromised the metallic machinery and menace of structural or physical collapse may be forthcoming. Critical analysis and testing to make sure strength has not been compromised may be important to cranes, rolling mills, machining jigs and templates.

Pressure Damage- Tight buildings due to good wadding create a lot of smoke and pressure. Extinguishing materials, particularly water, expands at high rates creating super-heated steam. These pressure and temperatures can spoil any substrate. When a construction heaves or expands it can blow out transom glass, doors and lift roofs.

los angeles Water Damage- Domestic water or procedure water that is near a fire or water used in fire containment to control a fire can also cause much of the spoil because the instantaneous water touches the hot surfaces it can create super-heated haze which is a very dominant force.

Chemical Residues & Hazardous Materials- The by-product of a flames and the crackdown procedure may make and generate a squander stream of acids, hydrocarbons and weighty metals including asbestos, lead and other EPA known and accredited hazards.  The potential hazards of sanitization, worker association and potentially risky waste stream must be handled by workers and technicians that know the usual practice and comprehend how to test surfaces, set out the waste while shielding the employee and a safe job site and leave paraphernalia in a decontaminated stipulation.

Electrical Shock- The healthiness care industry mandates testing for bio medical paraphernalia for currents and inappropriate grounding. Other types of equipments not properly processed can effect in a future fire or electrocution hazard particularly if filth is left unprocessed or internally left wet.

 

 

To replace damaged drywall and Effects of Water damage to walls

To put back spoiled drywall, first conclude how far back it requires being detached. A leak from a pipeline may need only a little part of drywall detached to access the pipe and stick it. In a los angeles flood damage bathroom, on the other side, you may need to eradicate the drywall around the whole room from the floor up 19-20 inches. Use a efficacy knife and a straight edge to mark and cut your wall covering. End in the center of a stud on either side of the aperture to provide an affix for the new drywall.

Eradicate any lagging in the wall and dry out the wall inner side. Only once the inside is entirely dry then you should attach the drywall. Replace wadding if detached, using new material. Cut a part of drywall to measure the proportions of the opening. Join with drywall bolts every 15 inches separately along each stud (twelve inches separately for ceiling dry wall). Cover the seams with drywall tape and cover up the seams and screw heads with joint compound or mud.

 

Sodden Plaster Walls - If your walls are made with plank and plaster, as is more common in older homes, there’s good quality news and bad. Characteristically, the plaster holds up better to infiltration than drywall, but it can acquire much longer to dry out. Loose plaster, advises the NCDCR, may be able to be reattached with splash washers. Plaster ceilings can be for the time being supported with supports made from 2-by-4 shamble in the shape of a “T”.

 

If the inside of a plaster wall is damp, get rid of baseboard trim and drill holes in the wall to permit water, moisture and dampness to escape. Use hand drills to stay away from the jeopardy of shock, and stay clear of wiring. Pull out any lagging and set up fans to support aeration. Refurbish the holes only once the wall interior is completely dry – a humidity meter helps immensely. For extensive plaster and lath damage, consider replacing the entire system.

Soggy Insulation - Though tearing your wall separately you may determine wadding, particularly if it’s an outside wall. Always remove the insulation. First, it may hide harm to the studs. Further, wet wadding deteriorates. It may compact, disintegrate, lose R-value and even harbor los angeles mold remediation or other contaminants. Even though inflexible foam filling may be recovered, it’s normally easier – and safer – to reinstate insulation with new material.

 

 

Fire damage restoration process and expert’s hiring

 

The los angeles fire damage restoration process is not so difficult and lengthy but it requires great skills and experience to recover the salvageable things after the fire damage. The restoration process must be carried out as early as possible because fire can be extinguished but the smoke can permeate into the things and worsen the situation. The water used for the extinguishing can also be damaging and can invite mold growth.

 

  • Hiring an expert from a restoration company

 

At first the home owners can be very shocked to see their house and precious belongings on fire but do not worry. Most of the items are salvageable after the los angeles fire damage. That is why it is advised to call the experts as soon as possible. Delay in the carrying out the process can worsen the situation. The home appliances as well as walls and floors of the house might turn yellow immediately if the process of restoration is delayed. The soot is acidic in nature and it will leave stains in bathrooms and ceilings of the home. After some days if an expert is not hired, the walls will discolor and the metallic items would be rusted due to acidic residue. So hiring an expert as early as possible is the best solution otherwise the cost of restoration will rise. The furniture and other items might get permanently damaged and cannot be salvaged. So they have to be discarded and you will suffer money loss. Experts know how to salvage the items that are not badly damaged. They have proper equipments and are properly trained. They have proper licenses and the health certifications.

 

  • Cleaning the soot and smoke damage

The experts would clean the smoke and soot from the valuable items because soot can permeate into the things and damage can become severe. They use dust masks and special personal care equipments that saves them from the soot and its damaging effects. Doors and windows must be opened for proper ventilation. These experts clean your floors, ceilings and upholstered furniture with special vacuums for soot removal. They have pressure washers that will help you in cleaning the exterior and walls of your home. The expert will clean up the residue and the smoke immediately because he have all the equipments, disinfectants and deodorizing fog. He will also encapsulate the odor and avoid the further recontamination.

 

 

Water damage restoration: some useful tips

 

The los angeles removal of water from the flooded areas or the houses and buildings hit by heavy rains is known as water damage restoration. Water damage restoration process must be carried out right after the flood or heavy rains hit the building. If this process is delayed then there is risk of mold growth and the severe damage to household items. The water that has damaged the building varies. It can be clear, gray or black in category. The damage can also be categorized as water can be. The clear water damage is not severe as compared to gray or black water damage. The gray or black water damage can worsen the situation because it is contaminated. The sources of water damage are floods and the leakages in homes. Heavy rains can also become a cause of severe water damage. Floods can be due to natural calamites like hurricanes and tsunamis.

Water damage outcomes

Water can damage almost every item of the house and it causes mold growth that in turn affects the human health too. The metallic items are affected by the rust while wooden items are rotted. Electronics of the house are also destroyed by water. Curtains, carpets and other accessories are destroyed initially by water and then by mold growth. The paints on the walls is also peeled off and damaged by water and mold. Mold growth is a serious problem because it is the cause of many diseases.

Water damage restoration tips

Whenever los angeles water damage has occurred to your home and your precious belongings like paper documents, curtains, clothes, carpets and furniture gets damaged, you must deal this immediately other wise this damage can become severe and irreparable. As soon as the water is drained you must call an expert from a well reputed los angeles water damage restoration company. They know how to recover the damaged items through the special equipment they have. They can minimize the damage caused by the water because they are well trained and fully equipped. They can repair the damaged walls immediately that can in turn increase the value of your house. The damaged walls can decrease the resale value of the house. These experts have all necessary machines and equipments to drain the excess water and dry the water damaged items. In special cases of black and gray water damage, these experts also have disinfectants that can be used to prevent from bacteria and germs.

 

Water damage: causes and some useful tips

The causes of water damage to the houses can vary. Floods and heavy rains can cause water damages in houses but sometimes the sources of water are with in the house and its structure. Here we would discuss some sources of water in the houses that are responsible for the water damage and in turn mold growth.

Leaky pipes in houses

The pipes that are leak are major source of water in the house and the water damage occurs due to these leaky pipes. The pipes leak because they become old and their life has been ended. In some cases the pipes are not properly fitted and they burst and cause water damage.

Overflowing toilets

The blockage in the sewage pipes can cause overflowing of the toilets and overflowing toilets are major sources of water damage.

Leaky/broken water heater

The water heaters in the house can also become leaky or broken and causes water damage. These heaters must be inspected regularly in order to prevent the leakage and water damage.

Heavy rains and storms

The heavy rainfall and the storms can damage your home and cause water damage to gardens as well as the interior of the home.

Flooding and hurricanes

Flooding can occur due to natural calamities or the internal leakage of pipes etc.

Fire extinguishing

If a fire has broken out in your house and fire brigades have extinguished that fire then the water can damage your house and belongings.

Water damage and some useful tips

Shut off the water

If the source is within the house then shut it off immediately.

Place your belongings in the dry place

The precious belongings and documents like ID card and degrees, furniture and carpets must be placed in some dry place immediately so that water damage to these items cannot become severe.

Power off the electricity

Switch off the main source of the house in order to prevent yourself and family from the electric shock.

Call your insurance company

Immediately call your insurance company in order to get a compensation for the water damaged items.

Documentation of damage

Take pictures of the water damaged items so that there is a solid proof to show to your insurance agent.

Call a water damage restoration company

Call a reputable water damage restoration company so that they may send an expert or professional restorer that can help you in restoration of the water damage.

Water damage: causes and some useful tips

The causes of water damage to the houses can vary. Floods and heavy rains can cause water damages in houses but sometimes the sources of water are with in the house and its structure. Here we would discuss some sources of water in the houses that are responsible for the water damage and in turn mold growth.

Leaky pipes in houses

The pipes that are leak are major source of water in the house and the water damage occurs due to these leaky pipes. The pipes leak because they become old and their life has been ended. In some cases the pipes are not properly fitted and they burst and cause water damage.

Overflowing toilets

The blockage in the sewage pipes can cause overflowing of the toilets and overflowing toilets are major sources of water damage.

Leaky/broken water heater

The water heaters in the house can also become leaky or broken and causes water damage. These heaters must be inspected regularly in order to prevent the leakage and water damage.

Heavy rains and storms

The heavy rainfall and the storms can damage your home and cause water damage to gardens as well as the interior of the home.

Flooding and hurricanes

Flooding can occur due to natural calamities or the internal leakage of pipes etc.

Fire extinguishing

If a fire has broken out in your house and fire brigades have extinguished that fire then the water can damage your house and belongings.

Water damage and some useful tips

Shut off the water

If the source is within the house then shut it off immediately.

Place your belongings in the dry place

The precious belongings and documents like ID card and degrees, furniture and carpets must be placed in some dry place immediately so that water damage to these items cannot become severe.

Power off the electricity

Switch off the main source of the house in order to prevent yourself and family from the electric shock.

Call your insurance company

Immediately call your insurance company in order to get a compensation for the los angeles water damaged items.

Documentation of damage

Take pictures of the water damaged items so that there is a solid proof to show to your insurance agent.

Call a los angeles water damage restoration company

Call a reputable water damage restoration company so that they may send an expert or professional restorer that can help you in restoration of the water damage.

 

FIRE DAMAGE TO TREES AND SHRUBS

FIRE DAMAGE TO TREES AND SHRUBS

Fire affects the trees and shrubs in different ways. Fire affects the individual plant species in one way and other species in another way. The extent to which the trees and shrubs are affected also depends on the intensity and severity of the fire. Biological factors (like morphology and physiology) of the plants also contribute to the post-fire effects. Other factors like age, resistance to heat and seasonality of the plant also directly affects the extent of fire damage. We can say that fire damage have different impacts on different shrubs and trees but here we would discuss the individual shrubs and trees and the extent to which they can be affected by a fire damage.

INDIVIDUAL PLANT TISSUE

Scientists like los angeles fire damage repair have been trying for so many years to determine a temperature at which the vascular plant tissue can be destroyed. This temperature is 60 degree centigrade and according to some other scientists even 45 degrees are also enough to make the plant tissues dead. The recent studies show that this temperature is 50-55 degree. Mortality rate of an individual plant varies and depends upon different factors like sensitivity of the plant. Plants can die at high temperatures as well as low temperatures depending upon the time period for which the plant was exposed to the heat or fire.

INDIVIDUAL SHRUBS AND FIRE DAMAGE

The impact of fire on individual shrubs depends upon different factors like intensity of fire, plant morphology    and seasonality etc. positivity and negativity of the impact depends upon the plant species and severity of fire. Moisture content also has an impact on the extent of fire damage in individual shrubs. The bark, twigs and leaves have generally more moisture content and hence a high temperature is needed to ignite them. Moisture level varies from season to season and this level reaches its highest when leaves are formed. And shoots are longed.

INDIVIDUAL TREES AND FIRE DAMAGE

Fire damage to individual trees depends upon various factors like age of the tree, conditions of growing and fire resistant barks etc. the mortality of trees also depends upon the severity of fire. The thickness of bark is a major factor that affects the fire resistance. This is also known as the stem effect. Bark effect depends upon the specie, diameter and age of the tree. Other factors include the crown of the tree, density of the branches and height of the tree.

 

 

Mold Growth: Remedial Measures

 

 

Mold Growth: Remedial Measures

Mold growth is dangerous in the residential areas. Basically the areas that are damaged by the water are good foundation for the mold to grow. Mold can grow easily anywhere (wood, carpet, floor, paper) especially on the organic substances. Moisture and oxygen are necessary for its growth. Mold is a basic cause of allergies and the respiratory problems. People are now more concerned about the avoiding and preventing mold in the homes. Excessive moisture is the basic reason and accelerator for mold growth. This moisture problem must be addressed properly to avoid the mold growth. Complete elimination of mold is not possible however its growth can be controlled by los angeles mold removal. Mold growth can occur in sealed buildings and those places where humidity is not under control. Where ventilation is not adequate and sufficient, moisture buildup.

Causes of Moisture Problems

Moisture problem can be caused by the following

  • Uncontrolled humidity
  • Changes in construction patterns
  • No or less ventilation
  • Drywalls
  • Roof leaks
  • Gutters
  • Delayed maintenance

Concealed Mold

Sometimes mold growth is unseen and hidden. This can occur on the back of the dry wall, walls that are behind the furniture or the bottom of the carpets and under padding. Hidden mold is dangerous because it is unable to detect. One can only detect a hidden mold growth from the odor or respiratory problem faced by the residents.

Prevention from Mold

Following steps must be taken in order to prevent your building from mold growth

  • Leaky plumbing must be fixed as early as possible
  • Moisture problems must be fixed
  • Try for air circulation and ventilation of the home or other building
  • Control the humidity level
  • los angeles mold remediation
  • Proper and timely maintenance
  • Drying of the wet and moist places quickly ideally within 48 hours

Remedial Instructions

Remedial measures should be scheduled in the times when the residents of home or building are not present so that the occupants are less likely to be affected by the debris of remedial activities. After the proper scheduling of remedial activity following remedial measures must be taken.

  • Moisture problems must be solved as soon as possible
  • Carrying of repair plan
  • Carrying the maintenance plan
  • Removal of mold
  • Drying of water damaged areas
  • Personal Protective Equipments (PPE) must be arranged

Outside support when needed must be called so that complete mold elimination is ensured and occupants can be saved from the health risks of the mold growth.

 

 

Water Damage and Home Appliances

Water Damage and Home Appliances

After a fire breaks out in a building or water hits it (either in the form of flood or heavy rain or any other leakage) the whole building is affected including the electric devices and appliances. Everyone wants to restore the fire, smoke or water damage and assessment of the property that is damaged by the water is the very first priority after saving lives of the individuals. The appliances that have been damaged by the flood or storm water can be restored. For this restoration, a trained and qualified technician is needed. An ordinary home owner cannot inspect the electric appliances and declare them fit in condition.

According to technicians of well known and famous companies such as los angeles water damage, a home owner must not touch or turn on the water damaged appliances and must call an expert for inspection of those devices. The trained technician will check whether the appliances are in condition of use or not. The responsibility of home owner is to switch of the devices as soon as los angeles water damage repair them. After this, it is technician’s responsibility to fix and bring that appliance to the working condition.

Water can cause potential hazards in the electronic devices and inspection of these devices by any expert is very necessary. An ordinary man cannot know about theses hazards and could cause a serious damage to him or other members of the home. Electrocution can be caused by the dry ocean salt water because it acts like a conductor and can cause corrosion. Gas components of the appliances are also damaged by the water. Following are some DIY tips that must be followed before the arrival of any expert who could help in inspection and restoration of the electronic devices.

  • As soon as water damages the appliances, disconnect them from the power source after water recedes.
  • Do not try to unplug the appliances when standing in the water.  This can result in serious electrical shock.
  • Now call the nearest authorized service facility provider for inspection of theses water damaged appliances. Inspection of appliances must be done after they become completely dry (after 4-5 days of the water damage done)
  • When the expert has finished the inspection you must replace all the damaged components (that were exposed to salt water). This is the most economical way of reconditioning of theses appliances.
  • Water filter of refrigerators, washing and sanitizing of bins of ice makers should be done. The dispenser of ice maker must also be flushed 3-5 times. Running the ice maker for one hour should be the next step. The items that are damaged by the flood water become contaminated and needs special cleaning procedures by expert technicians. For this you have to call the nearest water damage restoration company that will provide you expert to restore the water damaged items.